Welcome to Quad Quest!

Quad Quest

Flow Control
Idle - 10.00 mins
µL/min
µL
MS1
Resolution Check
Welcome to Quad Quest! Can you tune the mass spectrometer before your setup solution runs out? Put the instrument in operate, set up the fluidics, and start your infusion. Reservoirs A and B contain different masses, so try them both to find the peaks you need.

Your goal is to adjust the engineer settings until all four peaks are centered in their windows, and each has a full width at half height (FWHH) of approximately 0.5 Da (Daltons, unit of mass). Keep in mind that the low mass sliders also affect the high masses, and vice versa!

You can drag down over a peak to maximize it in its window, adjust the span for a wider or narrower view, or close some windows to focus on individual peaks. When you think your tune is ready, run the resolution check to see how close you are!

Want more of a challenge? Try changing the fill volume and tune against the clock with less solution and tighter acceptance criteria:

FWHH Position
Normal = 0.40–0.60 ±1.0 Da
Hard = 0.45–0.55 ±0.5 Da
Expert = 0.49–0.51 ±0.2 Da

Do you think you can achieve a perfect score of 100? Have fun!

Feedback is encouraged! github.com/jcrelli/QuadQuest
Mass Span Gain
1
2
3
4
59.1
0.00e0
x1
455.3
0.00e0
x2
1080.8
0.00e0
x10
2034.6
0.00e0
x20
Quad Quest 2026 by Jonathan Crellin (v 1.2) Status: Standby